FreedomWire · Reference · Firearms
What the NFA Actually Requires
The National Firearms Act is a tax-and-registration statute, and almost everything written about it is out of date on the one number people care about. The $200 stamp is now the exception, not the rule. What follows is the current text of 26 U.S.C. §§ 5811, 5821, 5841 and 5845 and 27 CFR Part 479, with the section cited on every rule — including the 2025 amendment that zeroed the tax on everything except machineguns and destructive devices.
Reference page · rules checked against the eCFR and the U.S. Code, November 19, 2026
1.What the NFA is, and what it is not
The NFA is chapter 53 of the Internal Revenue Code, 26 U.S.C. §§ 5801 to 5872, and ATF administers it under 27 CFR Part 479. It was enacted in 1934 and rewritten in 1968 by Pub. L. 90-618, which is the text in force today — the source note under § 5845 records the 1968 addition, and the categories themselves are older than the wording.
It does not ban anything, in the ordinary sense. It taxes the making and the transfer of a defined set of firearms and requires each one to be registered to a person. The registry is the National Firearms Registration and Transfer Record, and it holds the identification of the firearm, the date of registration, and the identity and address of the person entitled to possess it. 26 U.S.C. 5841(a) Everything else in the statute hangs off two questions: is the object a "firearm" as § 5845 defines the word, and if so, is it registered and was the tax paid.
That is also why the NFA and the Gun Control Act are so often mixed up. The NFA regulates a short list of items by registration. The GCA, at 18 U.S.C. § 921 and following, is the licensing and background check statute that applies to ordinary firearms — and one section of it, 18 U.S.C. 922(o), is what actually stops new machineguns. More on that in section 8.
2.The eight definitions, and the numbers inside them
The term "firearm" means eight things: a shotgun with a barrel or barrels under 18 inches; a weapon made from a shotgun that as modified is under 26 inches overall or has a barrel under 18 inches; a rifle with a barrel or barrels under 16 inches; a weapon made from a rifle that as modified is under 26 inches overall or has a barrel under 16 inches; any other weapon; a machinegun; any silencer as defined in 18 U.S.C. 921; and a destructive device. 26 U.S.C. 5845(a)
The regulation repeats the list almost word for word at 27 CFR 479.11 and then tells you how to measure. Barrel length on a shotgun or rifle with an integral chamber is the distance from the muzzle to the face of the bolt, breech or breech block, with the action closed and the firearm cocked. Overall length of a weapon made from a rifle or shotgun is measured between the extreme ends along a line parallel to the centre line of the bore. Those two sentences settle most arguments about whether a given build is a short-barreled rifle.
- Machinegun — any weapon which shoots, is designed to shoot, or can be readily restored to shoot, automatically more than one shot, without manual reloading, by a single function of the trigger. 26 U.S.C. 5845(b) It also covers the frame or receiver, any part designed and intended solely and exclusively for converting a weapon into a machinegun, and any combination of parts from which one can be assembled if those parts are in a person's possession or control.
- Any other weapon — a weapon or device capable of being concealed on the person from which a shot can be discharged by explosive energy, a pistol or revolver with a smooth bore designed to fire a fixed shotgun shell, and combination shotgun-and-rifle guns with barrels 12 inches or more but under 18 inches. 26 U.S.C. 5845(e) It does not include a pistol or revolver with a rifled bore, or a shoulder-fired weapon that cannot fire fixed ammunition.
- Silencer — any device for silencing, muffling or diminishing the report of a portable firearm, including any combination of parts designed or redesigned and intended for use in assembling or fabricating one, and any part intended only for that use. 27 CFR 479.11 The statute now cross-refers to 18 U.S.C. 921 for the definition; the regulation still carries the older phrasing. Both reach the same parts.
- Destructive device — explosive, incendiary or poison gas bombs, grenades, rockets with a propellent charge over four ounces, missiles with an explosive or incendiary charge over a quarter ounce, mines and similar devices; any weapon expelling a projectile with a bore over half an inch, other than a shotgun the Director finds is generally recognised as particularly suitable for sporting purposes; and any combination of parts for converting a device into one. 26 U.S.C. 5845(f)
Two exclusions do real work. An antique firearm — one not designed for rimfire or conventional centrefire ignition with fixed ammunition and made in or before 1898, including replicas, or one using fixed ammunition made in or before 1898 for which ammunition is no longer manufactured in the United States and is not readily available in ordinary commercial trade — is not a "firearm" for NFA purposes. 26 U.S.C. 5845(g) And the definition excludes any device, other than a machinegun or destructive device, that the Director finds is primarily a collector's item by reason of its date of manufacture, value, design and other characteristics and is not likely to be used as a weapon. That finding is not automatic: 27 CFR 479.25 sets out the request you have to file to get one, and 27 CFR 479.24 does the same job for destructive devices.
3.The tax, which is no longer $200 for most things
This is the part of the NFA most writing on the internet has not caught up with. The making tax is $200 for each firearm made in the case of a machinegun or a destructive device, and $0 for any firearm made that is not one of those two. 26 U.S.C. 5821(a) The transfer tax is the same shape: $200 for each machinegun or destructive device transferred, $0 for anything else, and it is paid by the transferor. 26 U.S.C. 5811(a)
Both sections were amended by Pub. L. 119-21, title VII, § 70436, on July 4, 2025. Before that, § 5811 read "$200 for each firearm transferred, except, the transfer tax on any firearm classified as any other weapon under section 5845(e) shall be at the rate of $5" — the $5 any-other-weapon stamp people still quote. The amendment applies to calendar quarters beginning more than 90 days after July 4, 2025 (§ 70436(d)).
The regulations have been conformed. 479.61: $200 for each firearm made in the case of a machinegun or destructive device, and $0 for any firearm made that is not. 27 CFR 479.61 479.82: $200 for each firearm transferred in the case of a machinegun or destructive device, and $0 for any firearm transferred that is not. 27 CFR 479.82 Both carry the source note ATF 2025R-45F, 91 FR 25117, May 8, 2026.
A zero rate is not the same as no paperwork. Each NFA firearm transfer in the United States is subject to a transfer tax, and the Director indicates that the transferor has paid it — and that ATF has approved the application — by adding a stamp of the proper denomination bearing the words "National Firearms Act". 27 CFR 479.81 The application, the approval, the stamp and the registration all still happen. What changed is the amount remitted with the form.
So the honest summary is: $200 still applies to machineguns and destructive devices, and to nothing else. If a guide tells you a suppressor transfer costs $200, it is quoting the law as it stood before 2026.
4.Registration: the record, and who is on it
Each manufacturer, importer and maker must register each firearm he manufactures, imports or makes, and each firearm transferred is registered to the transferee by the transferor. 26 U.S.C. 5841(b) The regulation puts the same rule at 27 CFR 479.101(b) and adds the one route for an unregistered firearm already in someone's hands: no firearm may be registered by a person unlawfully in possession of it except during an amnesty period established under section 207 of the Gun Control Act of 1968. 27 CFR 479.101(b)
Registration is a document you keep. A person possessing a registered firearm must retain proof of registration and make it available to the Secretary on request 26 U.S.C. 5841(e), which 27 CFR 479.101(e) restates for ATF officers. For a firearm you made, the proof is the approved Form 1 (§ 479.71). For one transferred to you, it is the approved Form 4 (§ 479.86).
Manufacturers file a different form — Form 2, Notice of Firearms Manufactured or Imported, filed no later than the close of the next business day, with all firearms made in a single day on one notice, and receipt of the notice effectuating registration 27 CFR 479.103 — which is why a dealer's inventory reaches the registry without a Form 1 or Form 4 being filed for each gun.
5.Form 1: making one yourself
No person shall make a firearm unless he has filed a completed application on ATF Form 1 (5320.1), Application to Make and Register a Firearm, in duplicate, executed under the penalties of perjury, and received the Director's approval — which effectuates registration of the firearm to the applicant. 27 CFR 479.62(a) "Make" is broad: it includes manufacturing by someone not qualified to engage in that business, putting together, altering, any combination of these, or otherwise producing a firearm. 26 U.S.C. 5845(i)
An individual applicant attaches a 2x2-inch photograph taken within the previous year, head bare, chin to crown about 1¼ inches, and two completed FBI Forms FD-258 fingerprint cards. 27 CFR 479.63(a) If the applicant is a trust, company, LLC, partnership, association or corporation and is not a licensed manufacturer, importer or dealer, every responsible person has to be identified too: a Form 5320.23 each, with a photograph and two fingerprint cards, plus the complete and unredacted trust or corporate documents (§ 479.63(b)).
Before the application goes to the Director, the applicant and every responsible person must forward a completed copy to the chief law enforcement officer of the locality. 27 CFR 479.62(c) That is a notification, not an approval — the CLEO's signature is not what the form waits on.
The Director considers the application, must contact the National Instant Criminal Background Check System, and returns the approved original to the applicant. The maker must not, under any circumstances, make the firearm until the Director has approved and returned the application with the National Firearms Act stamp affixed. If it is disapproved, the original and the remittance come back with the reason on the form. 27 CFR 479.64
Then mark it. A maker must place a serial number that duplicates no other firearm, and a name with the city and State where the firearm was made; the model if a designation has been made and the caliber or gauge go on the frame or receiver, or the barrel or slide where applicable. The markings must be at least .003 inch deep, with the serial number in a print size no smaller than 1/16 inch. 27 CFR 479.102
6.Form 4: buying one that already exists
No firearm may be transferred in the United States unless an application on ATF Form 4 (5320.4), Application for Tax Paid Transfer and Registration of Firearm, in duplicate and executed under the penalties of perjury, has been filed with and approved by the Director — and the application is filed by the transferor. 27 CFR 479.84(a) That last clause surprises people: the seller, not the buyer, is the applicant, which is why a dealer handles the form and the buyer supplies the photographs and prints.
The transferee supplies a 2x2-inch photograph taken within the past year and two FD-258 fingerprint cards if an individual; a trust or company supplies its complete and unredacted documents and a Form 5320.23 with a photograph and prints for each responsible person. 27 CFR 479.85 The description of the firearm on the form is specific: manufacturer or importer if known, caliber, gauge or size, model, serial number, barrel length for a short-barreled shotgun or rifle, overall length and barrel length for a weapon made from a rifle or shotgun. A firearm with no serial number gets one from ATF, which must then be stamped on the firearm. 27 CFR 479.84(b)(8)
On approval the Director affixes and cancels the stamp and returns the approved original to the transferor, who may then transfer the firearm along with it; approval effectuates registration to the transferee. The transferee shall not take possession until that has happened, and must keep the approved Form 4 as proof of registration. 27 CFR 479.86 The same section requires the NICS contact and says an application shall be denied if the transfer, receipt or possession would place the transferee in violation of law.
7.The routes that skip the transfer tax
Three, and all three still need an approved form. A firearm registered to a qualified importer, manufacturer or dealer may be transferred by that person without payment of the transfer tax to any other person qualified to manufacture, import or deal in firearms, on Form 3, filed by the transferor and approved before the firearm moves. 27 CFR 479.88
An executor may possess a firearm registered to a decedent during probate without that being a transfer, but no later than the close of probate must apply to move it: Form 5 (5320.5) to a beneficiary, or Form 4 if it is going outside the estate. 27 CFR 479.90a
And the third is narrow. An unserviceable firearm may be transferred as a curio or ornament without payment of the transfer tax, following the tax-exempt procedure with a statement on the application that the exemption is claimed because the firearm is unserviceable — and an unapproved transfer, or a transfer of something that turns out not to be unserviceable, or of an unserviceable firearm as something other than a curio or ornament, may expose the transferor to civil and criminal liability. 27 CFR 479.91
8.Machineguns: the separate wall at 1986
The NFA tax is not what stops new machineguns. Section 922(o) of title 18 makes it unlawful for any person to transfer or possess a machinegun, except a transfer to or by, or possession by or under the authority of, the United States or a State or political subdivision, or any lawful transfer or lawful possession of a machinegun that was lawfully possessed before May 19, 1986 — and so, notwithstanding any other provision of Part 479, no application to make, transfer or import a machinegun will be approved except as that section allows. 27 CFR 479.105(a)
What it allows for everything made after that date is narrow: sale or distribution to a government entity, dealer sales samples on a showing of expected governmental customers, and export under the Arms Export Control Act (§ 479.105(c) and (d)). A machinegun lawfully possessed before May 19, 1986 may keep being possessed by the person it is registered to and may be transferred on an approved application (§ 479.105(b)) — which is the entire basis of the transferable machinegun market.
Violations of chapter 53 carry the penalties imposed under 26 U.S.C. 5871. 27 CFR 479.181 We are not going to summarise a criminal statute's sentencing provisions on a reference page; read § 5871 itself.
9.What this page will not tell you
Processing times. Deliberately absent. ATF's turnaround for Forms 1 and 4 moves by weeks and by month, and we cannot source a current figure we would stand behind. Any number we printed here would be wrong within a quarter. Check ATF's own published figures instead of a blog post, including this one.
State law. Several states prohibit or separately regulate items the NFA allows, and a federal stamp does not authorise possession that state law forbids. Nothing here addresses your state.
Legal advice. This is a reading of the statute and the regulation, nothing more. The sections linked below are shorter than this page and they are the authority.
Where these rules come from
- 26 U.S.C. § 5845 — Definitions (the eight categories, machinegun, any other weapon, destructive device, antique firearm, make, transfer)
- 26 U.S.C. § 5811 — Transfer tax and § 5821 — Making tax, both as amended by Pub. L. 119-21, title VII, § 70436, July 4, 2025
- 26 U.S.C. § 5841 — Registration (the National Firearms Registration and Transfer Record)
- 27 CFR 479.11 — Meaning of terms (eCFR, current text)
- 27 CFR 479.61 and 479.82 — the making and transfer tax rates, as conformed by ATF 2025R-45F, 91 FR 25117, May 8, 2026
- 27 CFR 479.81 — Tax scope, and 479.62, 479.63, 479.64 and 479.71 — applying to make
- 27 CFR 479.84, 479.85, 479.86, 479.88, 479.90a and 479.91 — applying to transfer, and the tax-exempt routes
- 27 CFR 479.101, 479.102 and 479.105 — registration, identification, and machineguns
- 27 CFR 479.181 — Penalties
Part 479 was last amended in the places that matter to this page by ATF 2025R-45F (91 FR 25117, May 8, 2026) and ATF-2025R-21F (91 FR 24364, May 6, 2026). The eCFR is a continuously updated edition of the Code and is not itself an official legal edition; the annually published CFR and the U.S. Code are. The tax rates on this page were re-read from the eCFR and the statute on November 19, 2026.
Questions this page gets asked
- Do I still pay $200 to make or transfer an NFA firearm?
- Only for a machinegun or a destructive device. Since 26 U.S.C. 5811 and 5821 were amended by Pub. L. 119-21 § 70436 on July 4, 2025, the making tax and the transfer tax are $200 for a machinegun or destructive device and $0 for everything else — silencers, short-barreled rifles, short-barreled shotguns and any other weapon. 27 CFR 479.61 and 479.82 now read the same way. The application and registration are still required; a $0 item still needs an approved form and a stamp.
- Is a silencer an NFA firearm?
- Yes. 26 U.S.C. 5845(a)(7) includes any silencer as defined in 18 U.S.C. 921 among the firearms the NFA regulates, and 27 CFR 479.11 defines a muffler or silencer to include any combination of parts designed or redesigned and intended for use in assembling or fabricating one, and any part intended only for use in that assembly.
- What is the difference between a Form 1 and a Form 4?
- A Form 1 (5320.1) is the application to make a firearm — you are producing the NFA item yourself, and approval effectuates registration to you under 27 CFR 479.62. A Form 4 (5320.4) is the application to transfer a firearm that is already registered, and it is filed by the transferor, not the transferee, under 27 CFR 479.84.
- Can I take possession while my Form 4 is pending?
- No. 27 CFR 479.86 says the transferee shall not take possession of the firearm until the application filed by the transferor has been approved by the Director and registration of the firearm is effectuated to the transferee. The approved Form 4 comes back to the transferor, who delivers it with the firearm.
- Is a 14-inch rifle barrel an NFA firearm?
- Yes. 26 U.S.C. 5845(a)(3) covers a rifle having a barrel or barrels of less than 16 inches in length, and (a)(4) covers a weapon made from a rifle that as modified is under 26 inches overall or has a barrel under 16 inches. A shotgun is the same story at 18 inches. 27 CFR 479.11 tells you how to measure: barrel length with an integral chamber runs from the muzzle to the face of the bolt or breech block, closed and cocked.
- Does an NFA firearm have to be marked?
- Yes. 27 CFR 479.102 requires the maker, manufacturer or importer to place a serial number that duplicates no other firearm, plus a name and the city and State of the place of business (or of making), and the model if designated and the caliber or gauge. The markings must be at least .003 inch deep and the serial number in a print size no smaller than 1/16 inch. 27 CFR 479.101(f) adds that a firearm not identified as the part requires shall not be registered.
- Can a private person register a new machinegun today?
- No. 18 U.S.C. 922(o) makes it unlawful to transfer or possess a machinegun except to or by the United States, a State or a political subdivision, or a machinegun lawfully possessed before May 19, 1986. 27 CFR 479.105 says that notwithstanding any other provision of Part 479, no application to make, transfer or import a machinegun will be approved except as that section allows — which is government entities, qualified dealers' sales samples and export.
This is a reference page, not legal advice. For the rules themselves, read the statute and the eCFR sections linked above — they are shorter than this page, and they are what a court would read.
More firearms coverage →